Talking about the importance of the hardness of the grinding wh

  • Due to the increasing requirements of the industry for cutting technology, the hardness technology of the 14 inches cutting disc is getting higher and higher, and the hardness of the cutting piece determines everything of the product. At present, the high precision and high efficiency grinding by the super hard abrasive tool The cutting effect have been widely recognized. Now Henan abrasives manufacturers understand the importance of the hardness of the cutting piece; The cutting sheets are made of high-strength resin and preferably special abrasives, which allow large linear speeds, all exceeding 50 m / s, which are not easy to be brittle. The cutting is sharp, the cutting heat is extremely small, and the heat of the cutting sheet sample is shallow, thus limiting Reduce interference. Cutting sheets are widely used in machinery, automobile, shipbuilding, metallurgy, chemical industry, etc., and can also be used in iron decoration and equipment repair of modern houses and factories. Professional grinding of general metal, stainless steel, broken fire steel, tool steel construction metal, cast gray iron, hard cast iron metal. The superabrasive itself has a very high hardness, so it can process a variety of high hardness materials, especially materials that are difficult to machine with ordinary abrasives. For example, diamond abrasives are used to process hard alloys and non-metallic materials such as ceramics, agate, optical glass, semiconductor materials, stone, concrete, etc., and non-ferrous metals; The high quality cutting disc supplier has less wear, long service life, and high grinding ratio, and can obtain good economic effects under reasonable use conditions, especially for materials which are difficult to process with ordinary abrasives, and the economic effect is better.